TEL +86-13923172919
Vacuum Tube HF Welder Maintenance: How to Inspect, Test, and Replace Oscillator Tubes for Reliable Performance
The oscillator tube is the beating heart of every tube based HF welder repair strategy. It converts DC power…
-
-
How to Weld Rigid PVC to Soft PVC Film on an HF Welding Machine Without Burning: A Complete Process Guide
Soft PVC film welds easily. Rigid PVC fittings also weld easily. The challenge appears when you try to weld…
-
High Frequency Welding Machine EMC: How to Test and Control RF Welding Electromagnetic Leakage for CE and FCC Compliance
A high frequency welding machine generates powerful electromagnetic fields at its operating frequency. Properly contained, those fields stay inside…
-
Impedance Mismatch RF Welding: Why Your Seams Are Weak and How ATS High Frequency Welding Machine Auto Tuning Fixes It
An HF welding machine can produce a seam that looks acceptable but tears open at half the expected force….
-
How to Choose the Right HF Welding Die: Brass vs. Aluminum, Edge Design, and Buffer Layer for Strong, Consistent Seals
A high frequency welding machine converts electrical energy into heat through the die. The die is the final physical…
-
How to Choose the Right HF Welding Die: Brass vs. Aluminum Mold Material, Edge Design, and Buffer Layer Guide
A high frequency welding machine is only as good as the tooling that delivers its energy to the material….
-
Why Does My HF Welder Burn or Melt the Material? How to Set the Right Power and Weld Time
A burnt weld on an HF welding machine is not just a cosmetic problem. The TWI High Frequency Welding…
-
Vacuum Tube HF Welder Fault Diagnosis: Check Frequency, Contacts, and Oscillator to Fix HF Welding Machine No Output
You load the material, close the press, and trigger the cycle. The timer counts down. The press opens. The…
-
Uneven Seams on an RF Welding Machine: What Is Wrong and How to Correct It
An uneven seam on an RF welding machine is not a random event. Every inconsistency in a weld seam…
-
Material Sticking to the Die After HF Welding: Why It Happens and How to Prevent It
Material sticking to the die is one of the most disruptive problems in HF welding production. The press opens,…
