ZJ-6540AB 9 kW Pressure-Boost Medical Blister Sealing Machine

The ZJ-6540AB pressure-boost medical blister sealing machine is a 9 kW stainless steel blister sealer with oil-pressure boost and PLC control. It is recorded for medical device packaging and a 380 V supply. The pressure-boost system is intended for sealing tasks that need a higher pressing force; the actual Tyvek blister packaging and medical paper should be validated with samples. Confirm the tooling and output before quotation.

ZJ-6540AB Pressure-Boost Medical Blister Sealing Machine: Specifications & Electrical Configuration

Material & Application Compatibility

Medical paper, film and Tyvek blister packaging should be tested with the actual tooling. The PLC blister sealer controls the sealing cycle; confirm the recipe with the sample. Stainless steel construction supports a cleanable surface, but it does not by itself certify a sterile process. Sterility depends on the full packaging and sterilization validation.

Pressure-Boost or Standard Medical?

The 6540AB adds oil-pressure boost and stainless steel construction; the 5235AB is a pneumatic medical model; the six-station model adds station count.

How to choose:

• Choose 6540AB when a pressure-boost system and stainless steel construction are required.
• Choose 5235AB for a standard pneumatic medical configuration.
• Choose the six-station model when the sequence needs six stations.

Ask for a configuration check →

Installation Notes for Malaysia, Indonesia and Vietnam

The recorded supply is 380 V. Confirm frequency, plug standard and site voltage before shipment.

• Voltage stability: confirm whether a stabilizer is required.
• Humidity and heat: plan ventilation and moisture control around the electrical cabinet.
• Grounding: verify the factory earth before commissioning.
• Air supply: pneumatic models require pressure and consumption to be confirmed.
• Certification: check SIRIM (Malaysia), SNI (Indonesia), QCVN/TCVN (Vietnam) or CE scope for this exact model; do not claim without a certificate.

Safety & Routine Maintenance

⚠️ CRITICAL SAFETY NOTICE: Before changing tooling, clearing a jam or opening any guard, isolate the main power, lock it out and bleed residual pneumatic or hydraulic pressure. Adjustments to the sealing head or electrical cabinet should be made by trained personnel; other operators should not open the cabinet. Confirm the lockout procedure and pressure values in the machine manual.

• At each shift start, verify the emergency stop and guard interlocks.
• Inspect pneumatic or hydraulic lines and fittings for leaks.
• Keep the sealing head and platen clean; remove film, paper and card debris.
• Follow the manufacturer schedule for lubrication, filter replacement and electrical inspection.

Configuration Check Before Quotation

A useful configuration check covers:

1. Blister shell material, thickness and drawing;
2. Paper card or medical paper material, coating and print finish;
3. Required card size and tooling envelope;
4. Target output range and shift pattern;
5. Site voltage, frequency and air supply;
6. Destination country and required certification.

Request a configuration review →

Selection FAQ

What does pressure-boost mean?
The record specifies oil-pressure boost for the sealing head; the actual force and material response should be validated with a sample.

Is it suitable for Tyvek?
Tyvek blister packaging should be tested with the actual medical paper, film and tooling.

Does stainless steel guarantee sterility?
No. It supports cleanability; sterility depends on the full packaging and sterilization process.

What voltage?
380 V is recorded; confirm frequency and site voltage.

Related Configurations

• ZJ-5235AB medical blister sealing machine
• ZJ Six six-station medical blister sealing machine
• ZJ-50A dual-manipulator blister sealing machine
• ZJ-50A single-manipulator blister sealing machine