8KW TPU Logo Oil Pressure High Frequency Welding Machine - view 2
8KW TPU Logo Oil Pressure High Frequency Welding Machine - view 3
8KW TPU Logo Oil Pressure High Frequency Welding Machine - view 4
8KW TPU Logo Oil Pressure High Frequency Welding Machine - view 5
8KW TPU Logo Oil Pressure High Frequency Welding Machine - view 6
8KW TPU Logo Oil Pressure High Frequency Welding Machine - view 7

8KW TPU Logo Oil Pressure High Frequency Welding Machine

The 8KW TPU Logo Oil Pressure High Frequency Welding Machine provides high-precision embossing for the apparel and footwear industries. Utilizing a hydraulic system rather than standard pneumatic controls, it ensures stable pressure for intricate logo designs on TPU and leather. Equipped with an Austrian filament oscillation tube, this machine delivers consistent energy output for high-volume production across Southeast Asian manufacturing facilities.


Key Specifications & Electrical Configuration

The 8KW TPU Logo Oil Pressure High Frequency Welding Machine is engineered for industrial-grade embossing where pressure consistency is paramount. Unlike standard pneumatic units, this model utilizes a hydraulic oil pressure system to provide steady, non-rebound force. This is essential for maintaining the clarity of intricate logo designs on synthetic materials. The core oscillation system features high-quality filaments imported from Austria, ensuring stable energy conduction and resistance to electrical fluctuations during continuous operation.

Specification Value
Model Power 8KW
Pressure System Oil Pressure (Hydraulic)
Oscillation Tube Filament Imported from Austria
Input Voltage (Malaysia) 415 V / 50 Hz, 3-Phase
Input Voltage (Indonesia/Vietnam) 380 V / 50 Hz, 3-Phase
Certifications ISO9001, EU CE (verified)
Primary Applications TPU Logos, Leather Embossing
Platen Size Not specified

For Southeast Asian markets, the machine is configured to support standard industrial power grids. While the 3-phase 380V-415V configuration is standard, local utility requirements and site-specific electrical frameworks must be confirmed by a qualified importer or electrical engineer before installation to ensure compatibility with local Type G or Type C/F plug standards.

Material & Application Compatibility

This HF welding machine is specifically designed for thermoplastic materials that respond to dielectric heating. It solves the common production pain point of material deformation by combining high-frequency energy with precise hydraulic force. This makes it a primary choice for manufacturers in the apparel, footwear, and luggage sectors who require repeatable quality in branding elements.

Verified Compatible Materials:

  • TPU (Thermoplastic Polyurethane) films and sheets
  • Genuine and synthetic leather (PU-coated)
  • Various garment fabrics and decorative patches
  • PVC (Polyvinyl Chloride) for specialized branding

Application Scenarios:

  • Footwear Components: Welding decorative elements and structural patches onto athletic shoes.
  • Apparel Branding: Creating 3D textured logos for high-performance sportswear.
  • Leather Goods: Deep embossing for luxury wallets, belts, and handbags.
  • Luggage Decoration: Applying durable branding to bags and travel accessories.

Note: Materials such as PE, PP, and certain types of Nylon are not compatible with the high-frequency welding process and require alternative joining methods. Sample testing is recommended for all new material formulations.

Safety & Routine Maintenance

Operating high-frequency equipment requires strict adherence to safety protocols to manage both electromagnetic fields and hydraulic pressure. The 8KW model includes multiple protection systems to safeguard the oscillation tube and the operator. Regular maintenance is required to ensure the longevity of the Austrian filaments and the efficiency of the hydraulic seals.

⚠️ CRITICAL SAFETY NOTICE: This HF welding machine generates high-voltage electrical fields and high hydraulic pressure. Operation must be restricted to trained personnel. Always disconnect the main power supply and allow at least 5 minutes for capacitor discharge before accessing the internal oscillation barrel. Ensure the unit is properly grounded and all safety guards are functional before every shift.

Routine Maintenance Tasks:

  • Clean electrode contact surfaces daily with non-abrasive materials to prevent arcing.
  • Monitor hydraulic oil levels and inspect hoses for leaks on a weekly basis.
  • Inspect the RF oscillation tube for signs of filament wear or overheating.
  • Verify that emergency stop buttons and safety interlocks are fully operational at the start of each production cycle.
  • Schedule annual technical inspections to calibrate energy output and hydraulic pressure settings.

The 8KW TPU Logo Oil Pressure High Frequency Welding Machine is a 8KW hydraulic solution for repeatable logo embossing and welding of TPU and leather materials in industrial apparel and footwear applications across Southeast Asia.

Request a Technical Proposal

Contact the Zhenjia Machine engineering team to discuss your specific logo designs and material requirements. We provide technical proposals including custom mold configurations.

Mobile/Whatsapp: +86 18688277195

Selection FAQ

What is this machine used for?
TPU logo and embossing work on compatible technical textiles; confirm the material, thickness and pattern with a sample.

What power and voltage are recorded?
8 kW and 380 V / 50 Hz are recorded on this page; confirm the factory supply and local electrical requirements.

Does it need a custom mold?
Yes. The electrode or embossing mold should be reviewed together with the product drawing and sample.

What is the output?
Output depends on pattern area, material, pressure, cycle time and operator handling; validate it with a sample run.

Southeast Asia Configuration

For Malaysia, Indonesia and Vietnam, confirm the factory supply before ordering. The machine can be configured for 220–240 V single-phase or 380–415 V three-phase at 50 Hz; industrial units are normally hard-wired rather than supplied with a plug.

  • Malaysia: 240 V / 415 V, 50 Hz, Type G; confirm SIRIM / Energy Commission requirements for the exact model.
  • Indonesia: 220–230 V / 380 V, 50 Hz, Type C / F; confirm SNI / PLN requirements for the exact model.
  • Vietnam: 220 V / 380 V, 50 Hz, Type A / C; confirm QCVN / CR requirements for the exact model.

Regional search terms: high frequency welding machine Malaysia; high frequency welding machine Indonesia; high frequency welding machine Vietnam. Local product terms: mesin kimpalan frekuensi tinggi; mesin las frekuensi tinggi; máy hàn cao tần.

Related machines

Our Certificate

Packaging & Delivery

 

Sample Display

Zhenjia Machinery provides sample proofing service, and offers complete production process guidance and customized production solutions. If you need to check processed samples and product details, please contact us for physical samples or high-definition sample pictures to intuitively experience the processing accuracy and product effect of our machine.

Mold Supporting Service

This machine can be equipped with various specifications of molds, suitable for processing products of different sizes and types. All molds are made of high-quality wear-resistant materials. We can provide customized molds according to customer product specifications, and offer professional mold maintenance guidance to extend mold service life and ensure continuous production.